Intended Use; Before First Use; Mounting The Saw Blade Resp. The Scraper - Westfalia 11 34 15 Instruction Manual

Intended Use

The multi-function tool may only be used for dry sanding work. The tool is also
suitable for working on wood, metal, plaster, plastic and filler surfaces. The
sanding paper pads can also be used for removing rust, old paint and
intermediate sanding. The large and the small saw blades are suitable for
cutting wood and plastics.
This tool is not intended for commercial continuous operation.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Remove the multi-function tool and all accessories out of the packaging and
check all parts for damage in transit. Keep packaging materials out of reach of
children. There is risk of suffocation!
Before undertaking any work on the machine, pull out the power
plug!

Mounting the Saw Blade resp. the Scraper

1. Attach the tool (saw blade or scraper) to
the tool holder. The tool can be attached
in any desired position, e.g. in line with
the housing or on the right or left side of
the housing.
2. Attach the tool with the flange (6) and the
tool socket screw (7). Make sure to place
the flange with the convex side upwards
(see figure).
Operation
12