Examples For Adjustments For Different Saw Blades; Depth Stop - Westfalia 2003 Original Instructions Manual

lever must be swung up to move the stone into the gap between
the teeth.

Examples for Adjustments for different Saw Blades

1. 90 mm; motor moved back.
2. 230 mm; motor must be moved forward to avoid collision with
the arm.
3. 400 mm; motor moved forward, arm adjusted to avoid
collision of the blade with the mounting piece.
1.
90 mm

Depth Stop

After arm, motor and saw blade have
been adjusted, the depth stop must also
be adjusted.
To adjust the depth stop, move the
grinding stone into the gap between the
teeth deep enough to machine the
entire tooth; but not deep enough to
touch the bottom of the gap (a few
millimetres distance).
In this position tighten the screw of the depth stop.
Assembly and Using
2.
230 mm
17
3.
400 mm