Operation - Westfalia 2003 Original Instructions Manual

5. Mount the support pin for the spring
adjustment stop (D) on the base plate
using the square nut (step 1) and fix the
pin with the spring adjustment stop on
the support (step 2).
6. After that slide the saw blade support
into the slot as shown and secure it with
the square nut from below.(step 3).
7. Mount the grinding stone (step 1) on the
drive shaft. Secure the grinding stone
with the nut and the washer.
8. Finally, mount the protective hood on
the pin on the motor support (step 2).
Align the hood in such a way that the
grinding stone is covered and secure it
with the retaining screw.
The machine is now ready
for use.

Operation

Before connecting the machine to the power mains make sure
the machine is turned off to prevent unintended starting.
Always pull the power plug before undertaking any kind of work
on the machine.
Assembly and Using
14