Adjusting the Display Setting
When you use the remote control, the display switches on.
After 6 seconds, it switches off again.
You can change this time out to one of the following options:
1
Access the Set-up menu and press
The numbers 1 to 4 appear.
2
Select the desired display time out:
1 = 3 seconds;
2 = 6 seconds;
3 = 9 seconds;
4 = 12 seconds.
The Display key blinks twice to indicate that the new setting is stored and
the Set-up menu reappears.
Note
The display time out has an impact on the lifetime of the batteries: the
longer the display stays on, the faster the batteries will drain.
Using the Remote Control
Selecting a Device
You can select a device that you have installed on the remote control with
the
key:
Mode
• The Device indicator lights up.
• The touch screen keys for the selected device appear.
• The hard keys operate the selected device.
Using Touch Screen Keys and Hard Keys
The most frequently used functions of your devices are covered in the touch
screen keys and hard keys.
Only the functions for the selected device appear on the touch screen.You
can access other device functions with the
touch screen.
Using Macros
This remote control can contain up to 4 different macros.
The macros on the remote control are accessible via
This key always appears on page 1 of the touch
screen keys, no matter which device you are operating.
1
Press
The numbers 1 to 4 appear on the touch screen.
2
Press the number of the macro that you want to execute.
The macro is executed and the Device indicator of the last selected
device lights up.
to access the programmed macros.
.
key at the bottom of the
Page 2
.
7