Related Manuals for Philips SRP3013/10
Summary of Contents for Philips SRP3013/10
- Page 1 Universal Remote SRP3013 TAPR802 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Your universal remote Introduction 2 Get started Insert batteries (not included) Set up the universal remote 3 Use your universal remote control Learning 4 Notice Disposal of your old product and battery 7 5 Service and support Frequently asked questions Need help? -
Page 3: Your Universal Remote
Device selection buttons subtitle Congratulations on your purchase, and HOME welcome to Philips! To fully benefit from the SMART: SMART TV, My App or Apps support that Philips offers, register your product EPG: displays the program guide at www.philips.com/welcome... -
Page 4: Get Started
2 Get started Set up by code selection Switch on your device. Insert batteries (not included) Press and hold the device selection button (e.g. TV) for 5 seconds until the red LED is on. Warning • Check the battery polarity when inserting in the battery compartment. - Page 5 Enter the first 5-digit code using the digit Auto registration buttons. Switch on your device. If the light is off, a valid code is saved. Otherwise, the light will flash six times, and Press and hold the device selection button then remains on for code re-entry.
- Page 6 When the device is off, immediately press and release OK to save the code.The blue LED indicator will turn off. INFO TEXT INFO TEXT Operate the device with the universal remote. If your device responds correctly, it means you have saved the right code. Note •...
-
Page 7: Use Your Universal Remote Control
3 Use your Repeat from step 3 to learn other key functions, or press and hold any key for 3 universal secouds to terminate the learning mode, the LED indicator will go out immediately. remote control Note • On Step 4, if no key is selected for more than 15 seconds, the LED indicator will flash six times and the learning mode will exit automatically. -
Page 8: Notice
4 Notice Removing the disposable batteries To remove the disposable batteries, see section ‘Insert batteries’. Disposal of your old product When this logo is attached to a product, it and battery means a financial contribution has been paid to the associated national recovery and recycling system. -
Page 9: Service And Support
5 Service and You will find our contact details at the end of this user manual. For online support, visit support www.philips.com/support Frequently asked questions My universal remote does not work at all. • Check if you have correctly setup the device with the right code. - Page 10 Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.