Scenario 2 Connecting high-density disk enclosures
Connect two high-density disk enclosures using mini SAS HD electrical cables. The cables must be naturally bent,
and a minimum of 97 mm clearance must be reserved in front of each enclosure for winding cables.
Common and high-density disk enclosures cannot be connected to one expansion loop.
Each expansion loop of high-density disk enclosures must be connected to two adjacent ports (excluding ports P1
and P2) of the 12 Gbit/s SAS interface module on a controller enclosure, for example, ports P0 and P1 or ports P2
and P3.
Controller B
Expansion
module B
Controller A
15
Controller
enclosure
High-density
disk enclosure 3
Expansion
module A
High-density
disk enclosure 2
High-density
disk enclosure 1