(Optional) Installing a disk module
2g
Scenario 1 Installing the disk module of a disk enclosure
(1) Installing the disk module of a 2 U disk enclosure
NOTICE
Install a disk module of controller enclosure using the same method as installing the disk enclosure.
To ensure well heat dissipation, insert disks in the sequence of disk slot IDs. If the disk module is not
fully configured, cover filler panels over vacant disk slots.
Scenario 2 Installing the disk module of a high-density disk enclosure
(1)
NOTICE
To ensure well heat dissipation, insert coffer disks to slots of A0 to A3. Then insert disks from left to right
and from E to A. If the disk module is not fully configured, cover filler panels over vacant disk slots.
Installing filler panels
2h
In addition to the empty space of the cabinet, you must install filler panels for the cable tray of the controller
enclosure. The following figure shows how to install a filler panel.
(2) Installing the disk module of a 4 U disk enclosure
(2)
11