3e
Connecting to the maintenance terminal
After connecting a serial port on the storage system to the maintenance terminal through a serial cable, you can then
manage and maintain the storage system from the maintenance terminal.
During initial configuration, set an IP address for the management network port through the serial port.
Controller enclosure
3f
Connecting power cables
NOTICE
AC devices can connect only to AC power supplies. To ensure a high availability of the storage system and
avoid unexpected power failures, connect the storage system to two routes of power supplies.
Scenario 1 Connecting an AC power cable
Complete view of the AC power cables
External power
Disk enclosure
Controller enclosure
Maintenance
terminal
18
External power