General During Servicing; Regular Maintenance/Lubrication Schedule - Vaderstad Carrier X Series Instructions Manual

4.2

General during servicing

! Do not stand near hydraulic hoses under pressure. Recover any spilled oil after performing ser-
vice on the hydraulic system.
! Always use genuine Väderstad spare parts to maintain the quality and reliability of the imple-
ment. The warranty and any claim commitments will become void if third-party parts are used.
! Note that poor welding may result in serious personal injury or fatality. If in doubt, contact a
professional welding service for instructions.
4.3

Regular maintenance/lubrication schedule

Figure 4.2
! Grease the implement according to the intervals specified in the lubrication schedule, and al-
ways before and after winter storage and after high-pressure water cleaning.
! Before driving, ensure that all bolts and nuts have been tightened (not applicable to bolts in
flexible joints). During the season, make it a habit to regularly check that all bolts and nuts are
tightened.
! When putting away the implement for the winter, grease the piston rods.
01.05.2015 1
CRX 425-625
33