U.s. Customary Units - Mitsubishi Electric Melservo-Jet MR-JET Series User Manual

[Installation/wiring]
WARNING
● To prevent an electric shock, turn off the power and wait for 15 minutes or more before starting wiring
and/or inspection.
● To prevent an electric shock, ground the servo amplifier.
● To prevent an electric shock, any person who is involved in wiring should be fully competent to do the
work.
● To prevent an electric shock, mount the servo amplifier before wiring.
● To prevent an electric shock, connect the protective earth (PE) terminal (the terminal marked with the
symbol) of the servo amplifier to the protective earth (PE) of the cabinet.
● To prevent an electric shock, do not touch the conductive parts.
[Setting/adjustment]
WARNING
● To prevent an electric shock, do not operate the switches with wet hands.
[Operation]
WARNING
● To prevent an electric shock, do not operate the switches with wet hands.
[Maintenance]
WARNING
● To prevent an electric shock, any person who is involved in inspection should be fully competent to do
the work.
● To prevent an electric shock, do not operate the switches with wet hands.

U.S. CUSTOMARY UNITS

U.S. customary units are not shown in this manual. Convert the values if necessary according to the following table.
Quantity
Mass
Length
Torque
Moment of inertia
Load (thrust load/axial load)
Temperature
2
SI (metric) unit
1 [kg]
1 [mm]
1 [N•m]
-4 2
1 [(× 10 kg•m )]
1 [N]
N [°C] × 9/5 + 32
U.S. customary unit
2.2046 [lb]
0.03937 [inch]
141.6 [oz•inch]
2
5.4675 [oz•inch ]
0.2248 [lbf]
N [°F]