Advertisement
Configuring Basic Terminal Security
You may be required on certain functions to enter a password. It is best to change these
from the factory default to protect against potential fraudulent usage of the terminal.
Merchant Password
The merchant password is used to protect certain terminal functions. This password
comprises of four digits and has a factory default of 0000. If you forget this password,
please contact technical support.
Changing your merchant password
1.
Ensure the terminal is displaying the Welcome screen.
2.
Press the MAIN MENU key to display the Reports and Terminal Menu.
3.
Press the RIGHT ARROW key to show the additional menu items.
4.
Select SETUP from the menu.
5.
Select PASSWORD from the menu.
6.
Select CHANGE from the menu.
7.
Type in the old password and press the green ENTER key.
8.
Type in the new local password (default is 0000) and press the green ENTER key.
9.
Repeat the previous step.
10.
The terminal will beep and display TRANSACTION ACCEPTED.
11.
Your merchant password is now set up.
Supervisor (Maintenance) Password
This password is used to protect supervisory functions including changing some options
and, most commonly, authorising refunds.
You will need to call our technical support team to obtain this password.
Configuring Basic Terminal Security 15
Advertisement
