Connecting Standard Field Devices - Weidmuller UR20-4COM-IO-LINK Manual

5 Assembly and installation | Connecting standard field devices
Connecting IO-Link device for class B port
To connect an IO-Link device with class B port to your u-
remote station, you also need the following potential distribu-
tion modules:
– for input current path
– UR20-16AUX-I (order no. 1334770000)
– UR20-16AUX-GND-I (order no. 1334800000)
– for output current path
– UR20-16AUX-O (order no. 1334780000)
– UR20-16AUX-GND-O (order no. 1334810000)
Connecting IO-Link device for type B port
▶ Install the three modules in a u-remote station.
▶ Connect the IO-Link device as shown in the figure.
22
5.2 Connecting standard field devices
The module can be destroyed!
The voltage between C/Q and L- must not be greater that
the voltage between L+ and L-.
▶ Only connect the devices as shown.
Connecting sensor to C/Q
Connecting sensor to C/Q
▶ Connect the sensor as shown in the figure.
Connecting sensor to DI
Connecting sensor to DI
▶ Connect the sensor as shown in the figure.
Connect load to C/Q
Connect load to C/Q
▶ Connect the load as shown in the figure.
Manual Communication module UR20-4COM-IO-LINK
ATTENTION
2547720000/03/09.2019