Basic Operation - Ricoh FT6645 Service Training Manual

4. BASIC OPERATION

4.1 ONE-SIDED ORIGINAL FEED
[A]
[B]
[C]
[A]
[D]
When an original is set on the DJF feed table, the leading edge is stopped by
the stopper [A], and the feeler [B] activates the original set sensor. The Insert
Original indicator light goes out and the DJF informs the copier's CPU that
the originals have been set.
When the Start key is pressed, the copier's CPU sends the feed-in signal to
the DJF. On receipt of this signal, the stopper solenoid [C] activates to raise
the stopper to allow the originals to be fed in, and to lower the press rollers
[D] to press the originals against the pick-up rollers as shown.
FT6645/6655/6665 3-6 STM