Canon AD2 Service Manual page 22

3
Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit
2) Remove the Right Rear Cover
• 1 screw
How to remove
MEMO:
This procedure describes the removing procedure of Cassette 3 Pickup Assembly. Go
through the same procedure for the Cassette 4 Pickup Assembly.
3 Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit
MEMO:
When connecting from host machine, remove the cassette 1 and cassette 2.
1) Pull out cassette 1 and cassette 2 and remove the Right Front over 3.
• 1 screw
F-3-12
2)Open the Pedestal Right Cover and remove the Right Lower Sub Cover 2.
Right front cover 3
x2
Right Lower Sub Cover 2
Right Pedestal Cover
3-6
F-3-13
Clows
F-3-14
3-6