Canon AD2 Service Manual page 28

4
Maintenance > Maintenance > Adjustment > Margin Adjustment
4) Loosen the 3 fixing screws.
5) Move the adjusting plates back and forth by referring the scale checked in the step 2. As
moving the adjusting plate toward the rear by 1 scale, the left edge margin becomes 1mm
smaller.
MEMO:
When moving the scale, be sure that the amount of the value to be moved are the same
for the 2 points.
6) Tighten the fixing screw.
4 Maintenance > Maintenance > Adjustment > Margin Adjustment
7) Return the cassette to its original position.
MEMO:
When the cassette positions are uneven due to the mechanical adjustment, adjust them
by loosening the screw at left side.
F-4-3
8) Make copies using the Cassette 3 and 4, and check that the left edge margin is 2.5±1.5mm.
F-4-4
4-3
F-4-5
4-3