Canon AD2 Service Manual page 37

5
Installation > Installation Procedure
6) Remove tapes and packing materials from the Cassette 3.
7) Install the Cassette 2 and 3.
8) Pull of the Cassette 4, and remove tapes and packing materials.
9) Close the Cassette 4.
10) Close the Cassette Right Lower Cover.
11) Remove the Connector Cover on the Host Machine. (The removed connector cover
will no be used.)
• 1 screw with toothed washer (The removed screw will be used in step 16.)
12) Remove tape and plastic from the harness.
5 Installation > Installation Procedure
F-5-17
Plastic
Connector Cover
F-5-18
13) Connect the 5 connectors to the Host Machine.
14) Put the 5 harnesses through the guides.
• 1 Reuse Band
Connectors
x7
x5
15) Loosen a screw on the Connector Cover packed with the equipment, and attach the
grounding wire between the toothed washer and the screw.
Screw
U Shape Terminal
Toothed Washer
5-7
Connectors
Reuse Band
Harness Guides
F-5-19
F-5-20
5-7