Viewing Routing Information; View Input Routing Information; View Output Routing Information - Crestron DigitalMedia DM-MD8X8-CPU3 Product Manual

4. If desired, deselect the outputs to which the input is currently routed by pressing
the corresponding OUT buttons. The LEDs of the corresponding outputs go off.
5. Press the appropriate OUT buttons that correspond to the desired outputs.
The LEDs of the selected outputs light.
6. Press the ENTER button to route the input. The LCD shows the input number and
the outputs to which the input is routed.
To disconnect an input from an output:
1. Press the ROUTE push button. The ROUTE LED lights.
2. Press the desired OUT button.
3. Press the ENTER button. The output is disconnected from the input.

Viewing Routing Information

Routing information for inputs and outputs can be viewed on the LCD.

View Input Routing Information

To view routing information for inputs:
1. Press the VIEW push button. The VIEW LED lights.
2. Press the desired IN button to view the outputs to which the input is routed.
3. Press the AUDIO, VIDEO, and USB push buttons as desired to view the routing of
audio, video, or USB portions of an input signal.

View Output Routing Information

To view routing information for outputs:
1. Press the VIEW push button. The VIEW LED lights.
2. Press the desired OUT button to view the input that is routed to the output.
The LEDs of all outputs that are receiving the same input signal also light.
3. Press the AUDIO, VIDEO, and USB push buttons as desired to view the input that
is providing the audio, video, or USB portion of the output signal.
52 • DigitalMedia Switchers Product Manual – DOC. 8418A