Navigate The Installer Tools Menu; Using The Routing Push Buttons - Crestron DigitalMedia DM-MD8X8-CPU3 Product Manual

Navigate the Installer Tools Menu

To navigate the Installer Tools menu:
To navigate upward or downward in a menu, use the selection knob.
•
• To move the cursor to the right when entering data, press the > soft button.
• To move the cursor to the left when entering data, press the < soft button.
To select an item in a menu or to apply a new setting, press the ENTER button.
•
• To go back to the previous level in a menu, press the MENU button.
• To select an item in a series of items displayed horizontally on the LCD, press the
soft button under the desired item.
To enter digits or uppercase and lowercase letters, turn the selection knob
•
clockwise or counterclockwise as applicable until the desired character is
displayed.
To exit the Installer Tools menu, press the MENU button until the Exit Confirmation
screen appears. Press the YES soft button to exit the menu.

Using the Routing Push Buttons

This section provides information about the push buttons that can be used to route an
input to one or more outputs. The audio, video, and USB portions of a signal can be
routed simultaneously or separately.
NOTES:
• If the front panel is locked, pressing the routing push buttons has no effect and the
corresponding LEDs do not light. (The front panel can be locked or unlocked by
following the Control Setup > Front Panel Lock menu path.)
As discussed in the "Route Inputs to Outputs" section on page 23, the Main page of
•
the web interface can also be used to route an input to one or more outputs.
To route an input to one or more outputs:
1. Press the ROUTE push button. The ROUTE LED lights. By default, the AUDIO,
VIDEO, and USB LEDs also light, indicating the signal types that are to be routed.
2. If desired, deselect the signal types that are not to be routed by pressing the
AUDIO, VIDEO, and USB push buttons as appropriate. (Pressing the AUDIO,
VIDEO, and USB push buttons successively functions as a toggle to select or
deselect the signal types.)
NOTE:
3. Press the appropriate IN button that corresponds to the input to be routed.
The LED of the selected input lights.
which the input is currently routed also light.
Product Manual – DOC. 8418A
When audio is routed separately, the signal is 2-channel audio.
In addition, the LEDs of the outputs to
DigitalMedia Switchers • 51