Remote Los And Ais Response; Oct55 Test Pattern With Ami Line Code; H2Tu-R Los And Ais Response Priorities - ADC HiGain H2TU-C-319 List 4E User Manual

Testing

Remote LOS and AIS Response

Figure 30 shows the differing ways the H2TU-R can respond to the network, depending on the configuration of
the TLOS, NLBP, FT1, ALMP, and NAIS configuration options described in
page 19. See Table 13 on page 27
Remove alarm
pattern
ADC Option
Standard Option
Default configurations
are in bold.
OCT55 T P
EST
The OCT55 test pattern can be used in unframed mode to stress the system and verify data integrity. In an SF or
ESF framing mode, excessive zero anomalies may occur, which causes the H2TU-C to report ES, SES, and UAS
errors according to ANSI T1.231-1997.
54
for the response of the H2TU-C and H2TU-R to LOS and AIS alarm conditions.
YES
LOS event?
NO
[DIS]
NO YES
AIS event?
[DIS]
[AIS]
Figure 30. H2TU-R LOS and AIS Response Priorities
AMI L
ATTERN WITH
January 9, 2002
[ENA]
TLOS
NLBP
[AIS]
[ENA]
FT1
[LOS]
ALMP
[AIS]
NAIS
[CI]
C
INE ODE
LTPH-UM-1049-02, Issue 2
Table 5 on page 18 and Table 6 on
Loopback to Network
[LOS]
LOS to CPE
AIS to CPE
FT1 idle to NET & CPE
Pass on LOS to NET
Send AIS to NET
Send AIS-CI to NET
H2TU-C-319 List 4E