Connecting Electrical Harnesses - Mercury 40/50 Series Manual

7. Adjust the cable joint until the hole meets with the throttle arm
pin. After adjustment, lock a cable joint with a nut and secure
with a cotter pin.
a

Connecting Electrical Harnesses

1. Connect key switch harness to the engine harness.
2. Connect the pink and light blue leads from the key switch
harness to the engine harness.
a
IMPORTANT: Do not disconnect the electric couplers while the
engine is running, as this will damage the CD unit and could result
in a serious electric shock.
INSTALLATION
a - Cotter pin
b - Nut
c - Cable joint
d
d - Throttle cable
c
b
38314
b
51
c
a - Key switch
harness
b - Lead wires
c - Engine harness
38315