Mercury 40/50 Series Manual page 98

NOTE: Be sure the shift is at Neutral (N) when starting the engine.
This model is provided with start in gear protection.
Without sufficient cooling water, the engine, the water pump, and
other components will overheat and suffer damage. Provide a
sufficient supply of water to the water inlets during operation.
MH: Tiller Handle Model
1. Set the shift lever to Neutral (N).
NOTE: If the engine starts in gear, do not use the engine. Contact
your dealer.
2. Turn the throttle grip so the indicator line meets the "START"
mark.
3. Pull the choke knob out.
OPERATION
NOTICE
88
38347
38348
38349