Installing The Remote Control Box; Installation Of The Remote Control Cables (Box Side); Installation Of The Remote Control Box On Your Boat - Mercury 40/50 Series Manual

Installing the Remote Control Box

1. Position the remote control box in a place that will not interfere
with the handling of the controls, levers, and switches. Confirm
that there are no obstacles in the passage of the remote
control cables.
2. Determining remote control cable length: Use distances A and
B as depicted in the illustrations. Determining the proper
length for a remote control cable is dimensions A plus B plus
300 mm (12 in.).
a
NOTE: The minimum bend radius for a remote control cable is
typically 203 mm (8 in.). Avoid making sharp bends.
NOTE: To prevent accidental running of the engine, which could
result in an injury, do not connect the battery until the installation
of the remote control box and the engine is complete.

Installation of the Remote Control Cables (Box Side)

Follow the instruction manual provided with the remote control box.

Installation of the Remote Control Box on your Boat

Follow the instruction manual provided with the remote control box.
INSTALLATION
A
B
37530
46
41202
a - Center of transom