89600 VSA Software Configuration
Configuring the 89600 VSA software application to use the
digitizer hardware
Create a configuration for Keysight M9203A digitizer
1. Start the 89600 VSA software application.
2. Configure the digitizer as the VSA measurement input by creating an 'Analyzer
M9203A Hardware Extension of 89600 VSA Software
Configuration' that uses your digitizer as the Logical Instrument (ADC) by per-
forming the following steps:
a. From the menu, go to Utilities > Hardware > Configurations, and click on
Add New Configuration button (
dialog opens.
b. De-select 'Simulate Hardware' if it is selected (1).
c. Select Keysight MD2 digitizers(2) from the list of 'Possible Logical Instru-
ment' and drag it or click on the
figuration' box .
89600 VSA Software Configuration
). The 'New Hardware Configuration'
button (3) to add it to the 'Con-
7