Omron CPM2C Operation Manual page 97

3. The ladder-diagram display will change to indicate the online connection.
Changes to "Program," showing
the PC's operating mode.
Transferring the Program
Use the following procedure to transfer a program to the PC.
Before attempting to transfer the program, make sure that the SYSMAC-CPT
Support Software is online and that the CPM2C is in PROGRAM mode. The pro-
gram cannot be transferred unless the PC is in PROGRAM mode.
1, 2, 3... 1. Check that the PC is in PROGRAM mode, select "Online (O)" from the menu
bar, and "Transfer (Computer → PC (T))" from the Online menu.
ake sure that the CPM2C is in PROGRAM mode
M
before attempting to transfer the program.
2. Select "Program" and click "Transfer (Computer → PC)" to begin transfer
the program.
a) Select "Program."
Section 4-1
b) Click to begin
the program
transfer.