Omron CPM2C Operation Manual page 67

3-4-4 Removing and Wiring I/O Connectors
Compatible Connector Specifications (OMRON)
Connector
24-pin soldered
connector and cover
24-pin crimp
connector and cover
24-pin pressure
connector
3. Insert each lead wire into the terminal block and tighten that terminal's
screw.
4. After wiring the terminal block, insert the block into the Unit and tighten the
screws at the top and bottom of the terminal block.
The following tables provide specifications of compatible I/O connectors.
Connector: Fujitsu FCN-361J024-AU equivalent
Cover: Fujitsu FCN-360C024-J2 equivalent
Housing: Fujitsu FCN-363J024 equivalent
Contacts: Fujitsu FCN-363J-AU equivalent
Cover: Fujitsu FCN-360C024-J2 equivalent
Connector: Fujitsu FCN-367J024-AU/F equivalent
I/O connectors
Specifications
Section 3-4
Model number
C500-CE241
C500-CE242
C500-CE243