Omron CPM2C Operation Manual page 88

3-4-10 OMRON PT Connections
Connecting Cable
XW2Z-200T (2 m)
XW2Z-500T (5 m)
OMRON
Programmable Connecting Cable
Terminal
XW2Z-200T (2 m)
XW2Z-500T (5 m)
CPM1-CIF01
RS-232C Adapter
CPM1-CIF02
RS-422 Adapter
NT-AL001
RS-232C Adapter
In a 1:1 NT Link, a CPM2C can be connected directly to a Programmable Termi-
nal. The direct connection with a Programmable Terminal is possible through the
RS-232C port only; a PT cannot be connected directly through the Peripheral
port.
A Programmable Terminal can also be connected by a Host Link connection. Ei-
ther the RS-232C port or Peripheral port can be used for the Host Link.
XW2Z-070T-1 (0.7 m)
XW2Z-200T-1 (2 m)
Note The Programmable Terminal cannot be connected directly through the Periph-
eral port.
RS-232C port
(D-sub 9-pin)
CPM2C-CN111 (0.1 m)
CS1W-CN118 (0.05 m)
CPM2C-CN111 (0.1 m)
CS1W-CN114 (0.05 m)
Section 3-4
CPM2C CPU Unit