Important Safety Information - Projecta HDBC90 User Manual

12/24v 70a manual workshop battery charger
Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future reference.
WARNING
• Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.
• Before charging, read the instructions.
• For indoor use. Do not expose to rain.
• For charging lead acid batteries ONLY (of the size & voltage specified in the
specifications table).
• Always charge the battery on the correct voltage setting. Never set the charger
to a higher voltage than the battery.
• Disconnect the 240V mains supply before making or breaking the connections
to the battery.
• The battery charger must be plugged into an earthed socket-outlet.
• Connection to supply mains is to be in accordance with National wiring rules.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• If the AC cord is damaged do not attempt to use. It must be replaced or repaired
by a qualified person.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• Ensure all vehicle accessories including lights, heaters, appliances etc are turned off
prior to charging.
• This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
2
HDBC90 Instruction Manual.indd 2
4/06/12 3:02 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workshop 7000

Table of Contents