Output; Mechanical; Environmental - MGE UPS Systems EPS 7000 Installation Manual

Single module and shared systems
Hide thumbs Also See for EPS 7000:
Table of Contents

Advertisement

EPS 7000 Single and Shared Systems
1.5.2

Output

Power factor:
Total harmonic distortion
(THD):
Transient regulation:
Transient response:
Overload:
1.5.3

Mechanical

Height:
Depth:
Width:
Weight:
Finish:
1.5.4

Environmental

Recommended environment: 20° to 25° C (68° to 77° F); 50% relative humidity; computer room or other temperature-
Operating temperature:
Storage:
Humidity:
Altitude:
page 1 — 6
0.9 lagging
< 2% (linear load)
< 4% (for 100% non-linear load with a crest factor of up to 3.5)
± 1% for balanced load ± tbd for 100% unbalanced load
± tbd for 100% step load change
125% of rated load for 10 minutes (750-800 kVA), 10 minutes (555-625 kVA),
150% of rated load for 1 minute
82 in/2083 mm
39 in/991 mm
See Table 2-1
See Table 2-1
MGE light gray
and humidity-controlled environment
0° to 40° C (32° to 86° F) except battery
-20° to 50° C (-4° to 122° F)
up to 90% non-condensing (operating)
sea level to 1,000 meters (sea level to 3,280 feet) without derating; 1,000 to 2,000
meters (3,280 to 6,560 feet): derate operating temperature to a maximum of 28° C
(82° F)
Introduction

Advertisement

Table of Contents
loading

Table of Contents