Taskbar - R&S SMB100B Getting Started

®
R&S SMB100B
Tile
"Modulation"
"System Config"
"Sweep"
"Frequency"
"Level"
"Power sensors"
1)
requires additional options
7.3.3

Taskbar

The "Taskbar" shows a home and an info button, and assigns a labeled button
whenever you open a dialog. If more dialogs are open than the taskbar can dis-
play, touch and swipe the taskbar to scroll up and down.
The buttons shown in the following example represent the variants.
Table 7-1: Example of buttons in the taskbar
Getting Started 1422.1045.02 ─ 03
Access to:
●
Analog and stereo
●
Built in LF generator
●
"Save/Recall": settings for saving and loading instrument configura-
tions
●
"Remote access": Network and emulation settings.
●
"Setup": general system configuration
●
Frequency and level sweeps
●
List mode
●
RF frequency and phase
●
Reference frequency
●
RF level
●
Attenuator
●
Automatic level control
●
User correction
●
Power sensors
"Home" button
Returns to the home screen.
"User Menu"
Lists parameters that can be defined for quick access.
Shows the current remote access connections when the instrument is
remotely controlled.
Tip: An indicator in the "System Config" tile shows the current remote con-
trol status.
R&S NRP power sensors
Shows a connected external power sensor. The button displays the current
readings when the sensor is active.
Understanding the Display Information
1) 1)
, and pulse modulation settings
Instrument Control
49