R&S SMB100B Getting Started page 26

®
R&S SMB100B
To disconnect from power
The R&S SMB100B is in the standby state.
1. NOTICE! Risk of data loss. If you disconnect the R&S SMB100B from power
when it is in the ready state, you can lose settings and data. Shut it down first.
Set the toggle switch on the power supply to position [0].
The LED of the [On/Standby] key is switched off.
2. Disconnect the R&S SMB100B from the power source.
Getting Started 1422.1045.02 ─ 03
Preparing for Use
Switching On or Off
26