R&S SMB100B Getting Started page 41

®
R&S SMB100B
a) Select "Mode > Auto" to run the sweep continuously.
b) Select "Shape > Sawtooth" to set the waveform shape of the sweep signal.
c) Select "Spacing > Linear", to determine the calculation method for the fre-
quency shift of a step.
d) Set "Dwell Time > 15.0 ms", to determine the time interval of the sweep
steps.
5. Select the "Frequency Range" tab.
Getting Started 1422.1045.02 ─ 03
Trying Out the Instrument
Generating an RF Frequency Sweep Signal
41