Preparing For Use; Lifting And Carrying; Unpacking And Checking; Choosing The Operating Site - R&S SMB100B Getting Started

®
R&S SMB100B
4

Preparing for Use

This chapter describes the basic steps to be taken when setting up the
R&S SMB100B for the first time.
4.1

Lifting and Carrying

See also "Lifting and carrying the product"
► Use the carrying handle at the side for lifting and carrying the R&S SMB100B.
For mounting the R&S SMB100B in a rack, see
R&S SMB100B in a
4.2

Unpacking and Checking

1. Unpack the R&S SMB100B carefully.
2. Retain the original packing material. Use it to protect the control elements and
connectors when transporting or shipping the R&S SMB100B later.
See also chapter "Transporting" in the user manual.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
4.3

Choosing the Operating Site

Specific operating conditions ensure accurate measurements and avoid damage
to the R&S SMB100B and connected devices. For information on environmental
conditions such as ambient temperature and humidity, see the data sheet.
Getting Started 1422.1045.02 ─ 03
Rack", on page 17.
Choosing the Operating Site
on page 9.
Chapter 4.4.2, "Mounting the
Preparing for Use
15