Xerox 2101 User Manual page 14

1.3 Using the Touch Panel Display
1.3.2
Touch Panel Display
The touch panel display is located at the left side of the control panel. It displays the messages and
feature buttons required for performing a copy job. By touching the display with your fingers, you can
make settings or select required screens. In the following section, the main screens will be used to
explain the screen contents, as well as how to select the feature buttons. The touch panel display will
be referred to as the display from now on. And the contents shown on the display will be referred to
as the screen.
● Switch Mode buttons
You can use these buttons to switch between the basic copying and server operation.
Select Copy to make copies.
●
Select Copy and Save to make copies and to save the scanned document data to the server.
●
Select Save to File to save scanned document data to the server.
●
Select Build Job to define build job settings.
●
Select Edit/Print Files to change names of copy files and scan files saved to the server, merge copy files,
●
duplicate/move copy files, change settings and print copy files.
Select Scan to scan documents such as photographs as image data. Scanned document data is stored in
●
a mailbox as scan files. Scan files stored in mailboxes can be downloaded onto client computers.
"Chapter 6 Server"
"Chapter 7 Scanning"
14
Switch mode buttons
Memory
Paper Remaining