ACS ACM1252U-Y3 Reference Manual page 77

5.4.2.9. Get Received Data
This command is used to get the data received from the NFC Initiator device.
Get Received Data Command Format (5 bytes)
Command
Get Received Data
Get Received Data Response Format (11 bytes)
Response
Result
Where:
SNEP Message Len
SNEP Message
ACM1252U-Y3 – Reference Manual
Version 1.03
Class INS
E0h 00h
Class INS P1
E1h 00h 00h
1 byte. Length of the received SNEP Message.
Received SNEP message from Initiator devices.
P1 P2 Lc
00h 58h 00h
P2 Le
00h SNEP Message Len
Data Out
SNEP Message
Page 77 of 92
www.acs.com
info@acs.com.hk
.hk
www.acs.com.hk