ACS ACM1252U-Y3 Reference Manual page 62

5.4.1.1. Set Initiator Mode Timeout
This command is used to set the timeout for Initiator Mode.
Set Initiator Mode Timeout Command Format (7 bytes)
Command
Set Initiator Mode
Note: Unit = 10 ms, default value of Initiator Mode Timeout = 00 64h (100 * 10 ms = 1000 ms).
Set Initiator Mode Timeout Response Format (7 bytes)
Response
Result
Where:
Timeout
ACM1252U-Y3 – Reference Manual
Version 1.03
Class INS
E0h 00h
Class INS P1
E1h 00h 00h
2 bytes. Timeout for Initiator Mode (unit = 10 ms).
P1 P2 Lc
00h 41h 02h
P2 Le Data Out
Timeout
00h 02h
(MSB)
Data In
Timeout Timeout
(MSB) (LSB)
Timeout
(LSB)
Page 62 of 92
www.acs.com
info@acs.com.hk
www.acs.com.hk
.hk