Set Picc Operating Parameter - ACS ACM1252U-Y3 Reference Manual

5.3.10.

Set PICC Operating Parameter

This command is used to set the PICC operating parameter.
Note: The setting will be saved into non-volatile memory.
Set the PICC Operating Parameter Format (6 bytes)
Command
Set the PICC Operating
Parameter
Set the PICC Operating Parameter Response Format (6 bytes)
Response
Result
Operating Parameter (1 byte)
Operating
Parameter
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5 - 7
Note: Default value of Operation Parameter = 1Fh.
ACM1252U-Y3 – Reference Manual
Version 1.03
Class
E0h
Class INS P1
E1 00h 00h 00h
Parameter
ISO 14443 Type A
ISO 14443 Type B
The Tag Types to be detected during
FeliCa 212 Kbps
PICC Polling.
FeliCa 424 Kbps
Topaz
RFU
INS P1 P2 Lc
00h 00h 20h 01h
P2 Le Data Out
01h Operation Parameter
Description
RFU
Data In
Operation Parameter
Option
1 = Detect
0 = Skip
1 = Detect
0 = Skip
1 = Detect
0 = Skip
1 = Detect
0 = Skip
1 = Detect
0 = Skip
RFU
Page 56 of 92
www.acs.com
info@acs.com.hk
www.acs.com.hk
.hk