Enabling/Disabling Smart Response; Setting The Time And Date; Setting The Date - Honeywell Z-Wave Series Quick Installation Manual

Enabling/disabling Smart Response

Over time, your RCHT8600 series Z-Wave
thermostat will learn how long it takes your
system to reach the desired temperature. It can
then turn on your heating or cooling equipment
at the right time to make sure your home is
comfortable by the time you expect. This feature
is is available only if thermostat schedule is
enabled in the thermostat Installer setup menu
and turned On. To disable it follow steps below:
1
Touch Menu on the thermostat home screen.
2
Touch the or
RECOVERY, then touch Select.
3
Touch the or
RECOVERY ON or RECOVERY OFF, then
touch Done to confirm.
When Smart Response is active, you'll see the
recovery symbol in the upper-right corner of the
thermostat screen.

Setting the time and date

NOTE: The date and time are automatically updated by the Z-wave control when
enrolled.
Setting the time
1
Touch Menu on the thermostat home screen.
2
Touch the or
CLOCK, then touch Select.
3
Touch the or
TIME, then touch Select.
4
Press or
hold the buttons to move more quickly).
Touch Done when finished.
5
Set clock format (12 hours or 24 hours) and
daylight saving time in the same CLOCK
sub-menu.

Setting the date

1
Touch Menu on the thermostat home screen.
2
Touch the or
then touch Select.
3
Touch or
Select to confirm.
4
Continue to set day and year in the same
way. Touch Select to save your changes.
arrows until you see
arrows to select
arrows until you see
arrows until you see SET
to set the time (or press and
arrows until you see DATE,
to set the month, then touch
Back
Back
23
RCHT8600 Series
Done
Cancel
Select
Recovery
AM
Following Schedule
Mode Fan
Heat Auto
Away Home Sleep
Mode Menu Fan
Back Select
PM
Done Cancel
Select Back Select
Recovery