Honeywell Z-Wave Series Quick Installation Manual page 7

12
Turn your power ON.
Turn on the power at the breaker box
or switch that controls the heating/
cooling system.
13
Return to the thermostat
Return to the thermostat. Confirm
the screen shows START SETUP.
If your thermostat does not show
START SETUP, please contact
Customer Care at 1-800-468-1502.
14
Start setup.
Touch START SETUP to begin
15
Navigate and edit setup options.
Use the or
all the setup options. To see a list
of all setup options, go to page
10-13.
To edit an option, touch Edit or touch
text area.
The value is now blinking. Use
to select the correct value.
Touch Done or touch text area once
the correct value is selected
16
Finish setup.
until you see FINISH
Touch
SETUP. Touch Select or touch text
area.
17
Set time and date.
Set daylight saving time if you are in
an area that follows daylight saving
time. Set date, clock format, and
time on the next screens.
18
Your thermostat is now setup.
Refer to page 8 for more
information about basic operation.
to navigate through
Breaker box
ON
OFF
or
7
RCHT8600 Series
ON
ON
OFF
Switch
Cancel
Done
Select
MCR37366
No Yes
Back
M37367