Ranger R980XR Installation And Operation Manual page 31

• Adjustment Rod. Allows you to accommodate Tires of different sizes by controlling the location
of the Bead Breaker Mechanism.
When the Adjustment Know is in the
out further, accommodating larger Tire sizes.
To use the Adjustment Rod
its current locking position to the other locking position.
One side view, one top view. Not necessarily to scale. Not all components shown.
Bead Lifting Tool
Use the Bead Lifting Tool to pull the Tire's Bead up and over the Mount/Demount Tool to help
demount the Tire.
You can also use the Bead Lifting Tool to push down the Tire's Bead — to the left of the
Mount/Demount Head — during the mounting of a Tire.
The Bead Lifting Tool has an angled and a hooked end. You can use either end.
R980 Series of Tire Changers
In
locking position, the Bead Breaker Mechanism can come
: Grab the end of the rod, then move the outside of the rod from
31
P/N 5900158 — Rev. E1 — Nov. 2019