Ranger R980XR Installation And Operation Manual page 24

Turntable
The Turntable is where you put the Wheel whose Tire you are demounting or mounting.
Top and side views. Not necessarily to scale. Not all components shown.
There are several important things to know about the Turntable:
• Flat, steel piece. This is the actual Turntable. It holds the other components. It can rotate either
clockwise or counter-clockwise.
To rotate the Turntable clockwise
To rotate the Turntable counter-clockwise
• Clamp Mechanism. Each Clamp mechanism includes a Clamp and two Clamp Adjustment
Knobs. The Clamp Mechanism moves in and out to clamp Wheels either externally or internally.
"External" and "Internal" clamping refer to the location of the Clamp in relation to the Wheel.
Side view. Some components exaggerated for clarity. Large arrows show direction Clamps are
pressing. Only one of the four Clamps shown. Not necessarily to scale. Not all components shown.
R980 Series of Tire Changers
down
: Press on the Turntable Foot Pedal.
up
: Press
24
on the Turntable Foot Pedal.
P/N 5900158 — Rev. E1 — Nov. 2019