Table Of Contents; Introduction - Ranger R980XR Installation And Operation Manual

Table of Contents

Introduction
Shipping Information
Safety Considerations
Components
FAQ
Specifications
Installation Checklist
Installation

Introduction

This manual describes the following models in the R980 Swing Arm Series of Tire Changers:
• R980AT. 3 HP, 220 VAC, Tire Changer with Assist Tower.
• R980XR. 3 HP, 220 VAC Tire Changer; no Assist Tower.
More information about BendPak Ranger products is available at rangerproducts.com.
This manual is mandatory reading for all users
including anyone who sets up, operates, maintains, or repairs them.
You can always find the latest version of the
⚠
DANGER
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Tire Changer is available from your distributor or by calling
BendPak Ranger at (805) 933-9970. You may also call regarding parts replacement (please
have the serial number and model number of your unit available).
R980 Series of Tire Changers
3
4
4
6
8
9
10
11
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Operation
Maintenance
Troubleshooting
Wiring Information
Labels
Parts
Maintenance Log
of the R980 Series of Tire Changers,
manual for your product on the Ranger
3
P/N 5900158 - Rev. E1 - Nov. 2019
22
51
54
55
56
59
79
website.