Ranger R980XR Installation And Operation Manual page 26

Pedals
The Tire Changer has four Foot Pedals:
• Inflation Foot Pedal. Supplies air through the Air Pressure Gauge Cord.
• Turntable Foot Pedal. Rotates the Turntable. Press down to go clockwise, press up to go
counter-clockwise.
• Clamps Foot Pedal. Moves the Clamp Mechanisms in or out. Press down and release to move
the Clamp Mechanisms out (if they are in), press down and release to move the Clamp
Mechanisms in (if they are out). Pressing down and releasing the Clamps Foot Pedal moves the
Clamps to the opposite location of where they were.
• Bead Breaker Foot Pedal. Press down to move the Bead Breaker Blade in; release the pedal
to have the Bead Breaker Blade move back out to its starting position.
Top view. Not necessarily to scale. Not all components shown.
R980 Series of Tire Changers
26
P/N 5900158 — Rev. E1 — Nov. 2019