Entering Credentials - Centrica Panoramic Power Installation And Configuration Manual

Bridge Installation and configuration guide
9. Activate your web browser. In the address bar, enter IP address
10.0.0.10.
The Status page appears and displays the current configuration.
Notes
•
Please ensure that your laptop is not connected to any networks (Wi-Fi,
LAN etc.) when configuring the bridge. If your laptop supports "airplane
mode", consider placing the laptop in this mode to disable all such
networks easily.
•
It may take a few minutes for the computer to connect to the bridge's
DHCP server; you can release and renew your IP address on your
computer to speed up the process.
•
In some cases, first-time loading can take several minutes. If the Status
page does not appear, wait a few more seconds and refresh the page in
the browser. If the page does not load, use Ctrl+F5 to browser's cache
refresh.

Entering Credentials

You only need to enter your credentials once for accessing any of the pages
(except Status).
How to Proceed
1. Select the required page from the side menu.
2. Enter the Username
screen.
and Password in the Authentication Required