Loading The Bridge Configuration From A Configuration File; Modifying The Bridge Administration Settings; Modifying The Default Url And Port Of The Powerradar Server - Centrica Panoramic Power Installation And Configuration Manual

Bridge Installation and configuration guide

Loading the Bridge Configuration from a Configuration File

You can use the configuration file for setting up other bridges that have similar
requirements. For example, if bridges in a chain of stores share the same
Internet connection type and access points, you can prepare one configuration
file and use it for configuring other bridges in these locations.
You can also load the configuration file onto the same bridge if its configuration
gets corrupted.
How to Proceed
1. Access the bridge web interface.
2. Access the Connection Setup
3. Select Load Configuration
4. Select the relevant file and click Apply.
5. If necessary, enter the password manually (for example, Wi-Fi
password)

Modifying the Bridge Administration Settings

You can modify the bridge's default settings or reset all settings, including
connections, to factory defaults.

Modifying the Default URL and Port of the PowerRadar Server

To access these fields, select
where the URL of the PowerRadar server is provided.
page.
from File.
Administration in the bridge web interface. This is