Modifying The Default Credentials For The Bridge Web Interface; Resetting The Bridge Configuration To Factory Defaults - Centrica Panoramic Power Installation And Configuration Manual

Bridge Installation and configuration guide
Notes
•
With the latest firmware versions (411 and above), users can choose
the connection mode and the URL is automatically configured.
•
For older firmware versions, the DNS should be provided manually,
please make sure to type the address correctly and avoid spaces.
Connection
TLS (Default)
TCP

Modifying the Default Credentials for the Bridge Web Interface

You can change the default username and password required to access the
bridge configuration and Diagnostics
How to Proceed
1. Access the bridge web interface.
2. Select Administration.
3. Enter the new User Name
each).
4. In the Verify password
5. Select Save settings.

Resetting the Bridge Configuration to Factory Defaults

Important Restoring to factory defaults will erase all of your connection
settings!
How to Proceed
1. Access the bridge web interface.
2. Select Administration.
3. Click Reset to factory default
4. At the prompt, click OK.
URL
bridges.powerradar.energy
col.panpwrws.com
pages.
and Password (up to 15 characters for
field, enter the new password again.
at the bottom of the page.
Port
443
8051