Entering Credentials; Configuring The Bridge For Wi-Fi Connection - Centrica Panoramic Power PAN-2-H-US/EU Installation And Configuration Manual

Note
In some cases, the first-time loading can take several minutes. If the Status page does
not appear, wait a few more seconds and refresh the page in the browser.

Entering Credentials

You need to enter your credentials only once for accessing any of the pages (except Status).
How to proceed
1. Select the required page in the side menu.
2. Enter the Username and Password in the Authentication Required screen.
By default, both are panpwr. We recommend changing them once you access the
tool. See
3. Select Login.

Configuring the Bridge for Wi-Fi Connection

If the bridge communicates with the server over Wi-Fi, you need to configure which Wi-Fi
network and settings to use.
Prerequisites
Ask your network administrator for the following information:
•
SSID and Password to access the network
•
Username, certificate text, and RSA private key for networks requiring certificates.
•
For Wi-Fi and Ethernet connections, verify that the system administrator has opened
port 8051 for inbound/outbound TCP/IP traffic.
How to proceed
Revision 1. 2 November 2017
© 2017 Centrica plc.
Registered office: Millstream, Maidenhead Road, Windsor, Berkshire. SL4 5GD. Registered in England & Wales No 3033654
Page 9 of 22
Modifying the Default Credentials for the Bridge Web Interface.