Check Every 18000 Hours (Once Three Years) - Panasonic CM202 Series Maintenance Manual

1-9

Check Every 18000 Hours (Once Three Years)

1-9-1 Transfer Head : Replacing the Shaft
Abrasion of the shaft will cause an unsmooth nozzle motion. That will be the major factor of pick-up/
mount trouble. So the parts need to be replaced regularly.
∗ Please tell our service engineer in case of the parts replacement.
1-9-2 Transfer Head : Nozzle Holder • Clamp Arm • Spring for
Clamp Claw Holder • Spring for Nozzle Cushion
Tools Philips driver
Abrasion of each parts will cause an unsmooth nozzle motion. That will be the major factor of pick-
up/mount trouble. So the parts need to be replaced regularly.
∗ We recommend replacing each part simultaneously at the same timig.
1-9-3 XY Unit : Cable Bear
Abrasion of the cable bear will cause the disconnection of the wiring and pipe, and so the parts
need to be replaced regularly.
∗ Please tell our service engineer in case of the parts replacement.
444C-E-MMA01-A09-02
Nozzle holder
444C-470P
Required time 15 minutes
1
Page 1-93