Check Every 6000 Hours (Once a Year)
1-7-2
Replacing the Vacuum Pump
Tools
Philips driver, allen wrench
The fall of the vacuum pressure will cause the miss of the chip pick-up. For the stability of the
vacuum pressure, the replacement of the vacuum pump is required regularly.
444C-492P
444C-493P
Tube
To the next page
Page 1-82
1.
2.
cover
3.
4.
Fixing bolts
Required time
Turn OFF the power.
Open the cover at the rear side of the
machine (AR • BR).
∗ Remove the setting bolt by using the philips
driver.
Remove the tubes (black X 2) con-
nected to the vacuum pump.
Remove the 2 bolts fixing the vacuum
pump.
60 minutes
444C-E-MMA01-A09-05