Measurement Speed Control Commands - Keysight V3500A User Manual

Measurement speed control commands

Command Name
Description
Syntax
Response
Comments
Command Name
Description
Syntax
Response
Comments
Keysight V3500A User's Guide
Set normal speed mode
This command sets the V3500A to normal speed mode.
NMODE<LF>
OK
Normal speed mode is the default mode of operation.
The V3500A accuracy specifications apply in normal mode.
Measurement speed is level-dependent.
Set high speed mode
This command sets the V3500A to high speed mode.
HSMODE<LF>
OK
High speed mode turns off all internal averaging and
filtering. Measurement noise is higher (especially at low
signal levels), but the measurement speed is much faster.
Driver Installation and Commands 3
77