Installing Or Removing The Sd Module - Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual

5. Press the two release tabs
720i PCIe Adapter.
Figure 39. Removing the TMM
6. If you are instructed to return the old TMM, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 142.

Installing or removing the SD module

If you equip your server with an SD module, you can install up to two SD cards into the SD module for data
storage. You can purchase an SD module and SD cards from Lenovo.
For a list of ThinkServer options, go to:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
Installing the SD module
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the SD module and follow those instructions in addition to
the instructions in this topic.
To install the SD module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 57.
80
ThinkServer RD350G User Guide and Hardware Maintenance Manual
1
and lift the TMM straight up and out of the Lenovo ThinkServer RAID
page
eading and